Stability Chamber Manufacturer and Supplier in Pune
- Home
- Stability Chamber
Stability Chamber Manufacturer and Supplier in Pune
MODEL: LSC-320
- Looking for a Stability Chambers Manufacturer and Supplied in Pune We Got You Covered. Stability Chamber are available in various sizes and design and customize options are available. We supply in all parts of Pune like Chakan MIDC, Talegaon MIDC, Bhosari MIDC, Pimpri MIDC, Ranjangaon MIDC, Hinjawadi MIDC, Kurkumbh MIDC, Baramati MIDC.
UNIQUE FEATURES
- High Temperature Accuracy
- Flexible & Space Saving Stability Chamber
- Superior Functionality
- Negligible Maintenance
- Ergonomic Design
- Long-Term stability tests
- Better Temperature Uniformity
- The Stability Chamber Manufacturer and Supplier in Pune is designed to simulate and control environmental conditions such as temperature and humidity to assess the stability of products over time. It is essential for testing the shelf life and performance of pharmaceuticals, chemicals, and other products under controlled conditions.
TECHNICAL DATA
- Temperature/Humidity display: Digital LED 3.5 digit.
- Temperature Range: 10.0°C to 60.0°C
- Humidity Range: 25% to 95% RH
- Accuracy/Uniformity: ±0.1°C/+1°C
- For conditions as per ICH guidelines (International Conference of Harmonization) 25°C -60% RH/40°C -75% RH/30°C -65% RH/ 25°C-40% RH/40°C -25% RH/30°C-35% RH.
- Accuracy/Uniformity: ±2% RH / ± 3% RH
- Resolution: 0.1°C/1% RH
- Control: Microprocessor based PID control Auto tune.
- Temperature sensor: PT-100
- Cooling: CFC free Copeland make compressor utilizing R 134A eco friendly refrigerant, with condenser, motor and relay or as per the requirement of customer for higher accuracy.
- RH sensor: Direct capacitance type
- Heating: 'U' shaped tubular heater in stainless steel.
- Electrical: 230V/15A/50 Hz
- Steam injection: Boiler with reservoir made of thick stainless steel, with heater, water inlet control, low water level safeguard
- Calibration certificate by ERTL - Mumbai with traceability ERTL.
- Construction: Double wall, outer cabinet mild steel powder coated and inner chamber stainless steel 304 grade, Double door - outer metal body and inner acrylic door.
- Air circulation: cooling type fan with impellar/blower and flange type motor.
- Chamber illumination: Fluorescent light with door switch.
- Castor wheels for easy move ability with minimum weights bearing of 50kg.
- Trays: Stainless steel wire mesh heavy duty.
SAFETY FEATURES
- Electrical overload cutoff relay for compressor
- High Temperature safety cut off
- Electrical circuit breaker
- Time delay for compressor switch ON
- Low water level boiler cut off
PRE INSTALLATION MANDATORY REQUIREMENT
- (Guarantee void in case of non compliance)
- a) Distilled water or DM water continuous supply with tap for boiler input of % "BSP at 3 feet height.
- b) Room temperature around machine preferably at 25°C with air conditioning or a well ventilated room with exhaust fan. However, surrounding temperature should not exceed 30°C.
- c) Stabilized input voltage of 230V A.C Amps. Use of servo controlled stabilizer is recommended.
- d) Water Drain line with 1/2" nozzle to be provided at floor level.
|
Model LSC-320 (a)
|
Size W x D x H
|
Liters
|
Cu. Ft.
|
No. of Shelves
|
|---|---|---|---|---|
|
LSC-320 (a)
|
43 X 43 X 50 cm
|
90 Lit.
|
3 Cu. Ft.
|
2
|
|
LSC-320 (b)
|
50 X 50 X 70 cm
|
180 Lit.
|
6 Cu. Ft.
|
2
|
|
LSC-320 (c)
|
55 x 55 x 100 cm
|
300 Lit.
|
10 Cu. Ft.
|
3
|
|
LSC-320 (d)
|
60 X 60 X 100 cm
|
360 Lit.
|
12 Cu. Ft.
|
3
|
OPTIONAL ACCESSORIES
- Standby Refrigeration Systems as per capacity.
- R.H. Imported Sensor for 100% RH Readings.
- Door Access Security system.
- CFR 21 part 11 compliance software for PLC with Rs. 485 or Ethernet Communication.
- Data Logger for Rs. 485 communication system with PC Connectivity.
- Timer
- Micro PLC Based Control & Recording System for Reach in stability testing chamber with in-built Recording, PC Interface with 21 CFR Software, DOT - Matrix Printer Interface.
- PLC for auto change over for standby refrigeration.
- SMS Mobile alert system.
- Recommended Stabilizer.
- 4, 8 and 12 channel Data Scanner complete with sensor RH and PT-100 Sensor.
- Safety Digital Temperature Controller
- We are pros in manufacturing and supplying stability chamber since1986 more than 39 years we have various Customize options GMP and Non-GMP stability chamber. We have well trained Team to handel any maintenance works.
OUR COMPLETED PROJECTS
GOOGLE REVIEW
FAQ
Can you supply stability chamber in Pune?
Yes, we do supply stability chamber in all parts in Pune.
How much is the cost of stability chamber?
The stability chamber price range start from 70000 to 3 lac.
What is the purpose of stability chamber?
Stability chambers are used extensively in the pharmaceutical industry for testing and evaluating the shelf life of drugs.
What are the requirements for a stability chamber?
Standard Features for Stability Chambers
A temperature range of -20°C to 94°C (-4°F to 201°F) should be possible inside the chamber for testing purposes. The acceptable humidity range should be 20% to 95% RH (relative humidity).
A temperature range of -20°C to 94°C (-4°F to 201°F) should be possible inside the chamber for testing purposes. The acceptable humidity range should be 20% to 95% RH (relative humidity).
What is the ICH guideline for stability chamber?
Conditions as per ICH guidelines (International Conference of Harmonization): 25°C - 60% RH / 40°C - 75% RH / 30°C - 65% RH / 25°C - 40% RH / 40°C - 25% RH / 30°C - 35% RH.
Note: We are Stability Chamber Manufacturer in Mumbai, Supplier, Dealer, Exporter in Mumbai, Hyderabad, Bangalore, Pune, Ahmedabad, Chennai, Visakhapatnam, Surat, Nashik, Warangal, Vijayawada, Coimbatore, Vadodara, Navi Mumbai, Thane, Maharashtra, Goa, Gujarat, etc.
